Sebastien Plante
33030a9ee8
Klipper version: v0.13.0-411-g938300f3 Moonraker version: v0.9.3-128-g960e933 Mainsail version: v2.15.0
66 lines
1.6 KiB
INI
66 lines
1.6 KiB
INI
[virtual_sdcard]
|
|
path: /home/pi/gcode_files
|
|
|
|
[display_status]
|
|
|
|
[pause_resume]
|
|
|
|
[gcode_macro PAUSE]
|
|
rename_existing: BASE_PAUSE
|
|
gcode:
|
|
{% set X = params.X|default(230)|int %}
|
|
{% set Y = params.Y|default(230)|int %}
|
|
{% set Z = params.Z|default(10)|int %}
|
|
{% set E = params.E|default(1)|int %}
|
|
SAVE_GCODE_STATE NAME=PAUSE_state
|
|
BASE_PAUSE
|
|
G91
|
|
G1 E-{E} F2100
|
|
G1 Z{Z}
|
|
G90
|
|
G1 X{X} Y{Y} F6000
|
|
|
|
[gcode_macro RESUME]
|
|
rename_existing: BASE_RESUME
|
|
gcode:
|
|
{% set E = params.E|default(1)|int %}
|
|
G91
|
|
G1 E{E} F2100
|
|
G90
|
|
RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
|
|
BASE_RESUME
|
|
|
|
|
|
[gcode_macro CANCEL_PRINT]
|
|
rename_existing: BASE_CANCEL_PRINT
|
|
gcode:
|
|
TURN_OFF_HEATERS
|
|
CLEAR_PAUSE
|
|
SDCARD_RESET_FILE
|
|
BASE_CANCEL_PRINT
|
|
|
|
#[gcode_macro BED_MESH_CALIBRATE]
|
|
#rename_existing: BASE_BED_MESH_CALIBRATE
|
|
#gcode:
|
|
# #before the original gcode
|
|
# BED_MESH_CLEAR
|
|
# QUAD_GANTRY_LEVEL
|
|
# G1 X125 Y125 Z5 F6000
|
|
# #the original gcode
|
|
# BASE_BED_MESH_CALIBRATE
|
|
# #after the original gcode
|
|
|
|
## Use:
|
|
## - DUMP_WARNINGS
|
|
[gcode_macro DUMP_WARNINGS]
|
|
description: Debug: Print all warning messages from klipper
|
|
gcode:
|
|
{% if not printer.configfile.warnings %}
|
|
{action_respond_info("klipper too old! Please update klipper first and run again")}
|
|
{% else %}
|
|
{% set parameters = ["printer.configfile.warnings:"] %}
|
|
{% for warning in printer.configfile.warnings %}
|
|
{% set parameters = parameters.append("%s -> %s -> %s\n%s" % (warning.type, warning.section, warning.option, warning.message)) %}
|
|
{% endfor %}
|
|
{action_respond_info(parameters|join("\n"))}
|
|
{% endif %} |