Autocommit from 2025-11-30 18:00:05
Klipper version: v0.13.0-411-g938300f3 Moonraker version: v0.9.3-128-g960e933 Mainsail version: v2.15.0
This commit is contained in:
@@ -26,7 +26,7 @@ variable_disable_runout :False # disable runout by setting this variabl
|
|||||||
variable_disable_autochange :True # disable filament auto change after runout detection
|
variable_disable_autochange :True # disable filament auto change after runout detection
|
||||||
variable_disable_tangle :False # disable tangle by setting this variable True
|
variable_disable_tangle :False # disable tangle by setting this variable True
|
||||||
variable_pause_timeout :3600 # printer timeout setting in seconds, avoids disabling of steppers and heaters after klipper default timeout of 600s
|
variable_pause_timeout :3600 # printer timeout setting in seconds, avoids disabling of steppers and heaters after klipper default timeout of 600s
|
||||||
variable_enable_beep :True # uses M300 sound feature, set it True to enable
|
variable_enable_beep :False # uses M300 sound feature, set it True to enable
|
||||||
variable_park_position_x :20 # edit your X parking position here for pause macro triggered by runout
|
variable_park_position_x :20 # edit your X parking position here for pause macro triggered by runout
|
||||||
variable_park_position_y :0 # edit your Y parking position here for pause macro triggered by runout
|
variable_park_position_y :0 # edit your Y parking position here for pause macro triggered by runout
|
||||||
variable_park_lift_z :20 # edit your Z-Lift amount for parking position here, default is 10
|
variable_park_lift_z :20 # edit your Z-Lift amount for parking position here, default is 10
|
||||||
|
|||||||
BIN
moonraker-sql.db
BIN
moonraker-sql.db
Binary file not shown.
856
printer-20251130_142558.cfg
Normal file
856
printer-20251130_142558.cfg
Normal file
@@ -0,0 +1,856 @@
|
|||||||
|
## Voron Design VORON2 250/300/350mm SKR 1.4 TMC2209 UART config
|
||||||
|
## Made for V2.1102 with Beacon3D and Orbitool.
|
||||||
|
|
||||||
|
## *** THINGS TO CHANGE/CHECK: ***
|
||||||
|
## MCU paths [mcu] section
|
||||||
|
## Thermistor types [extruder] and [heater_bed] sections - See https://www.klipper3d.org/Config_Reference.html#common-thermistors for common thermistor types
|
||||||
|
## Z Endstop Switch location [safe_z_home] section
|
||||||
|
## Homing end position [gcode_macro G32] section
|
||||||
|
## Z Endstop Switch offset for Z0 [stepper_z] section
|
||||||
|
## Probe points [quad_gantry_level] section
|
||||||
|
## Min & Max gantry corner postions [quad_gantry_level] section
|
||||||
|
## PID tune [extruder] and [heater_bed] sections
|
||||||
|
## Fine tune E steps [extruder] section
|
||||||
|
|
||||||
|
##========================== Pin Definitions ========================
|
||||||
|
## X_STEP_PIN 2.2
|
||||||
|
## X_DIR_PIN 2.6
|
||||||
|
## X_ENABLE_PIN 2.1
|
||||||
|
## X_STOP_PIN 1.29
|
||||||
|
## E0_DET_PIN 1.26
|
||||||
|
## X_UART_PIN 1.10
|
||||||
|
|
||||||
|
|
||||||
|
## Y_STEP_PIN 0.19
|
||||||
|
## Y_DIR_PIN 0.20
|
||||||
|
## Y_ENABLE_PIN 2.8
|
||||||
|
## Y_STOP_PIN 1.28
|
||||||
|
## E1_DET_PIN 1.26
|
||||||
|
## Y_UART_RX 1.9
|
||||||
|
|
||||||
|
|
||||||
|
## Z_STEP_PIN 0.22
|
||||||
|
## Z_DIR_PIN 2.11
|
||||||
|
## Z_ENABLE_PIN 0.21
|
||||||
|
## Z_STOP_PIN 1.27
|
||||||
|
## PWR_DET_PIN 1.0
|
||||||
|
## Z_UART 1.8
|
||||||
|
|
||||||
|
|
||||||
|
## E0_STEP_PIN 2.13
|
||||||
|
## E0_DIR_PIN 0.11
|
||||||
|
## E0_ENABLE_PIN 2.12
|
||||||
|
## E0_UART 1.4
|
||||||
|
|
||||||
|
|
||||||
|
## E1_STEP_PIN 1.15
|
||||||
|
## E1_DIR_PIN 1.14
|
||||||
|
## E1_ENABLE_PIN 1.16
|
||||||
|
## E1_UART_RX 1.1
|
||||||
|
|
||||||
|
|
||||||
|
## HE1 2.4
|
||||||
|
## HE0 2.7
|
||||||
|
## BED 2.5
|
||||||
|
## TH1 (H1 Temp) 0.23
|
||||||
|
## TH0 (H0 Temp) 0.24
|
||||||
|
## TB (Bed Temp) 0.25
|
||||||
|
## FAN 2.3
|
||||||
|
## SERVO 2.0
|
||||||
|
## PROBE 0.10
|
||||||
|
##===================================================================
|
||||||
|
|
||||||
|
## MCU for X/Y/E steppers main MCU
|
||||||
|
## [X in X] - B Motor
|
||||||
|
## [Y in Y] - A Motor
|
||||||
|
## [E in E0] - Extruder
|
||||||
|
[mcu]
|
||||||
|
## Obtain definition by "ls /dev/serial/by-id/*" then unplug to verify
|
||||||
|
##--------------------------------------------------------------------
|
||||||
|
serial: /dev/serial/by-id/usb-Klipper_lpc1769_0D70FF0F871C4AAF53417C5DC42000F5-if00
|
||||||
|
##--------------------------------------------------------------------
|
||||||
|
|
||||||
|
## MCU for Z steppers
|
||||||
|
## [Z in X] - Front Left
|
||||||
|
## [Z1 in Y] - Rear Left
|
||||||
|
## [Z2 in Z] - Rear Right
|
||||||
|
## [Z3 in E0]- Front Right
|
||||||
|
[mcu z]
|
||||||
|
## Obtain definition by "ls /dev/serial/by-id/*" then unplug to verify
|
||||||
|
##--------------------------------------------------------------------
|
||||||
|
serial: /dev/serial/by-id/usb-Klipper_lpc1769_00A00004A49869AFEAD93E5EC02000F5-if00
|
||||||
|
##--------------------------------------------------------------------
|
||||||
|
|
||||||
|
[printer]
|
||||||
|
kinematics: corexy
|
||||||
|
max_velocity: 300
|
||||||
|
max_accel: 6000 #Max 4000
|
||||||
|
#max_accel: 10000 #Only there for input shaper
|
||||||
|
#minimum_cruise_ratio: 0.5 #[OLD] not enabled.
|
||||||
|
max_z_velocity: 30 #Max 15 for 12V TMC Drivers, can increase for 24V
|
||||||
|
max_z_accel: 350
|
||||||
|
square_corner_velocity: 5.0
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# X/Y Stepper Settings
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
## Connected to X on mcu_xye (B Motor)
|
||||||
|
[stepper_x]
|
||||||
|
step_pin: P2.2
|
||||||
|
dir_pin: !P2.6
|
||||||
|
enable_pin: !P2.1
|
||||||
|
rotation_distance: 40
|
||||||
|
microsteps: 32 # [OLD] was 16
|
||||||
|
full_steps_per_rotation:200 #set to 400 for 0.9 degree stepper
|
||||||
|
endstop_pin: P1.29
|
||||||
|
position_min: 0
|
||||||
|
##--------------------------------------------------------------------
|
||||||
|
|
||||||
|
## Uncomment below for 250mm build
|
||||||
|
#position_endstop: 250
|
||||||
|
#position_max: 250
|
||||||
|
|
||||||
|
## Uncomment for 300mm build
|
||||||
|
#position_endstop: 300
|
||||||
|
#position_max: 300
|
||||||
|
|
||||||
|
## Uncomment for 350mm build
|
||||||
|
position_endstop: 350
|
||||||
|
position_max: 350
|
||||||
|
|
||||||
|
##--------------------------------------------------------------------
|
||||||
|
homing_speed: 100 #Max 100
|
||||||
|
homing_retract_dist: 10
|
||||||
|
homing_positive_dir: true
|
||||||
|
|
||||||
|
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||||
|
[tmc2209 stepper_x]
|
||||||
|
uart_pin: P1.10
|
||||||
|
interpolate: False #[OLD] True
|
||||||
|
run_current: 0.8
|
||||||
|
sense_resistor: 0.110
|
||||||
|
stealthchop_threshold: 0
|
||||||
|
|
||||||
|
## Connected to Y on mcu_xye (A Motor)
|
||||||
|
[stepper_y]
|
||||||
|
step_pin: P0.19
|
||||||
|
dir_pin: !P0.20
|
||||||
|
enable_pin: !P2.8
|
||||||
|
rotation_distance: 40
|
||||||
|
microsteps: 32 #[OLD] 16
|
||||||
|
full_steps_per_rotation:200 #set to 400 for 0.9 degree stepper
|
||||||
|
endstop_pin: P1.28
|
||||||
|
position_min: 0
|
||||||
|
##--------------------------------------------------------------------
|
||||||
|
|
||||||
|
## Uncomment for 250mm build
|
||||||
|
#position_endstop: 250
|
||||||
|
#position_max: 250
|
||||||
|
|
||||||
|
## Uncomment for 300mm build
|
||||||
|
#position_endstop: 300
|
||||||
|
#position_max: 300
|
||||||
|
|
||||||
|
## Uncomment for 350mm build
|
||||||
|
position_endstop: 350
|
||||||
|
position_max: 350
|
||||||
|
|
||||||
|
##--------------------------------------------------------------------
|
||||||
|
homing_speed: 100 #Max 100
|
||||||
|
homing_retract_dist: 10
|
||||||
|
homing_positive_dir: true
|
||||||
|
|
||||||
|
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||||
|
[tmc2209 stepper_y]
|
||||||
|
uart_pin: P1.9
|
||||||
|
interpolate: False #[OLD] True
|
||||||
|
run_current: 0.8
|
||||||
|
sense_resistor: 0.110
|
||||||
|
stealthchop_threshold: 0
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# Z Stepper Settings
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
## Z MCU - In X Position
|
||||||
|
## Z0 Stepper - Front Left
|
||||||
|
[stepper_z]
|
||||||
|
step_pin: z:P2.2
|
||||||
|
dir_pin: !z:P2.6
|
||||||
|
enable_pin: !z:P2.1
|
||||||
|
rotation_distance: 40
|
||||||
|
gear_ratio: 80:16
|
||||||
|
microsteps: 32 #[OLD] 16
|
||||||
|
#endstop_pin: z:P1.27
|
||||||
|
endstop_pin: probe:z_virtual_endstop #Beacon3D
|
||||||
|
## Z-position of nozzle (in mm) to z-endstop trigger point relative to print surface (Z0)
|
||||||
|
## (+) value = endstop above Z0, (-) value = endstop below
|
||||||
|
## Increasing position_endstop brings nozzle closer to the bed
|
||||||
|
## After you run Z_ENDSTOP_CALIBRATE, position_endstop will be stored at the very end of your config
|
||||||
|
#position_endstop: -0.5
|
||||||
|
##--------------------------------------------------------------------
|
||||||
|
|
||||||
|
## Uncomment below for 250mm build
|
||||||
|
#position_max: 210
|
||||||
|
|
||||||
|
## Uncomment below for 300mm build
|
||||||
|
#position_max: 260
|
||||||
|
|
||||||
|
## Uncomment below for 350mm build
|
||||||
|
position_max: 310 #[OLD] 340
|
||||||
|
|
||||||
|
##--------------------------------------------------------------------
|
||||||
|
position_min: -5 #[OLD] -35
|
||||||
|
homing_speed: 3
|
||||||
|
homing_retract_dist: 0
|
||||||
|
|
||||||
|
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||||
|
[tmc2209 stepper_z]
|
||||||
|
uart_pin: z:P1.10
|
||||||
|
interpolate: False #[OLD] True
|
||||||
|
run_current: 0.8
|
||||||
|
sense_resistor: 0.110
|
||||||
|
stealthchop_threshold: 0
|
||||||
|
|
||||||
|
## Z MCU - In Y Position
|
||||||
|
## Z1 Stepper - Rear Left
|
||||||
|
[stepper_z1]
|
||||||
|
step_pin: z:P0.19
|
||||||
|
dir_pin: z:P0.20
|
||||||
|
enable_pin: !z:P2.8
|
||||||
|
rotation_distance: 40
|
||||||
|
gear_ratio: 80:16
|
||||||
|
microsteps: 32 #[OLD] 16
|
||||||
|
|
||||||
|
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||||
|
[tmc2209 stepper_z1]
|
||||||
|
uart_pin: z:P1.9
|
||||||
|
interpolate: False #[OLD] True
|
||||||
|
run_current: 0.8
|
||||||
|
sense_resistor: 0.110
|
||||||
|
stealthchop_threshold: 0
|
||||||
|
|
||||||
|
## Z MCU - In Z Position
|
||||||
|
## Z2 Stepper - Rear Right
|
||||||
|
[stepper_z2]
|
||||||
|
step_pin: z:P0.22
|
||||||
|
dir_pin: !z:P2.11
|
||||||
|
enable_pin: !z:P0.21
|
||||||
|
rotation_distance: 40
|
||||||
|
gear_ratio: 80:16
|
||||||
|
microsteps: 32 #[OLD] 16
|
||||||
|
|
||||||
|
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||||
|
[tmc2209 stepper_z2]
|
||||||
|
uart_pin: z:P1.8
|
||||||
|
interpolate: False #[OLD] True
|
||||||
|
run_current: 0.8
|
||||||
|
sense_resistor: 0.110
|
||||||
|
stealthchop_threshold: 0
|
||||||
|
|
||||||
|
## Z MCU - In E0 Position
|
||||||
|
## Z3 Stepper - Front Right
|
||||||
|
[stepper_z3]
|
||||||
|
step_pin: z:P2.13
|
||||||
|
dir_pin: z:P0.11
|
||||||
|
enable_pin: !z:P2.12
|
||||||
|
rotation_distance: 40
|
||||||
|
gear_ratio: 80:16
|
||||||
|
microsteps: 32 #[OLD] 16
|
||||||
|
|
||||||
|
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||||
|
[tmc2209 stepper_z3]
|
||||||
|
uart_pin: z:P1.4
|
||||||
|
interpolate: False #[OLD] True
|
||||||
|
run_current: 0.8
|
||||||
|
sense_resistor: 0.110
|
||||||
|
stealthchop_threshold: 0
|
||||||
|
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# Extruder
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
# E0 on MCU X/Y
|
||||||
|
#[extruder]
|
||||||
|
#step_pin: P2.13
|
||||||
|
#dir_pin: P0.11
|
||||||
|
#enable_pin: !P2.12
|
||||||
|
## Update value below when you perform extruder calibration
|
||||||
|
## If you ask for 100mm of filament, but in reality it is 98mm:
|
||||||
|
## rotation_distance = <previous_rotation_distance> * <actual_extrude_distance> / 100
|
||||||
|
## 22.6789511 is a good starting point
|
||||||
|
#rotation_distance: 22.6789511 #Bondtech 5mm Drive Gears
|
||||||
|
#rotation_distance: 12.849 #CW2 Stealthburner
|
||||||
|
## Update Gear Ratio depending on your Extruder Type
|
||||||
|
## Use 50:10 for Stealthburner/Clockwork 2
|
||||||
|
## Use 50:17 for Afterburner/Clockwork (BMG Gear Ratio)
|
||||||
|
## Use 80:20 for M4, M3.1
|
||||||
|
#gear_ratio: 50:17 #BMG Gear Ratio
|
||||||
|
#microsteps: 32 #[OLD] 16
|
||||||
|
#full_steps_per_rotation: 200 #200 for 1.8 degree, 400 for 0.9 degree
|
||||||
|
#nozzle_diameter: 0.400
|
||||||
|
#filament_diameter: 1.75
|
||||||
|
#heater_pin: P2.7
|
||||||
|
## Check what thermistor type you have. See https://www.klipper3d.org/Config_Reference.html#common-thermistors for common thermistor types.
|
||||||
|
## Use "Generic 3950" for NTC 100k 3950 thermistors
|
||||||
|
#sensor_type: ATC Semitec 104GT-2
|
||||||
|
#sensor_pin: P0.24
|
||||||
|
#min_temp: 10
|
||||||
|
#max_temp: 270
|
||||||
|
#max_power: 1.0
|
||||||
|
#min_extrude_temp: 170
|
||||||
|
#control = pid
|
||||||
|
#pid_kp = 26.213
|
||||||
|
#pid_ki = 1.304
|
||||||
|
#pid_kd = 131.721
|
||||||
|
## Try to keep pressure_advance below 1.0
|
||||||
|
#pressure_advance: 0.05
|
||||||
|
## Default is 0.040, leave stock
|
||||||
|
#pressure_advance_smooth_time: 0.040
|
||||||
|
|
||||||
|
## E0 on MCU X/Y
|
||||||
|
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||||
|
#[tmc2209 extruder]
|
||||||
|
#uart_pin: P1.4
|
||||||
|
#interpolate: false
|
||||||
|
#run_current: 0.5
|
||||||
|
#sense_resistor: 0.110
|
||||||
|
#stealthchop_threshold: 0
|
||||||
|
|
||||||
|
[extruder]
|
||||||
|
step_pin = orbitoolO2S:PB3
|
||||||
|
dir_pin = !orbitoolO2S:PB4
|
||||||
|
enable_pin = !orbitoolO2S:PC14
|
||||||
|
microsteps = 32
|
||||||
|
rotation_distance = 4.50 # Orbiter v2.5 4.69
|
||||||
|
full_steps_per_rotation = 200
|
||||||
|
nozzle_diameter = 0.400
|
||||||
|
filament_diameter = 1.750
|
||||||
|
heater_pin = orbitoolO2S:PB9
|
||||||
|
sensor_pin = orbitoolO2S:PA1
|
||||||
|
pullup_resistor = 2200
|
||||||
|
sensor_type = ATC Semitec 104GT-2 # update with correct sensor type PT1000 sensor are also suported
|
||||||
|
#sensor_type: PT1000
|
||||||
|
min_temp = 0
|
||||||
|
max_temp = 300 # increase in case your hottend suports higher operating temperature
|
||||||
|
pressure_advance = 0.015 # user calibration needed
|
||||||
|
pressure_advance_smooth_time = 0.03 # user calibration needed
|
||||||
|
max_extrude_only_distance = 500.0
|
||||||
|
max_extrude_cross_section = 20
|
||||||
|
min_extrude_temp = 170
|
||||||
|
smooth_time = 0.5
|
||||||
|
max_power: 0.995 # limit heater power to 99.5% to enable autorecovery from short detection
|
||||||
|
#control = pid # user calibration needed
|
||||||
|
#pid_Kp=30.477
|
||||||
|
#pid_Ki=1.600
|
||||||
|
#pid_Kd=145.141
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# Bed Heater
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
## SSR Pin - Z board, Fan Pin
|
||||||
|
[heater_bed]
|
||||||
|
heater_pin: z:P2.3
|
||||||
|
## Check what thermistor type you have. See https://www.klipper3d.org/Config_Reference.html#common-thermistors for common thermistor types.
|
||||||
|
## Use "Generic 3950" for Keenovo heaters
|
||||||
|
sensor_type: Generic 3950
|
||||||
|
sensor_pin: z:P0.25
|
||||||
|
## Adjust max_power so it doesn't exceed the SSR rating. The Omron G3NA-210B-DC5 SSR is rated at 4 amps without a heatsink.
|
||||||
|
## The formula is "4 / (Wattage_of_bed_heater / Mains_voltage) = max_power"
|
||||||
|
## If max_power is greater than 1.0, use 1.0
|
||||||
|
max_power: 0.6
|
||||||
|
min_temp: 0
|
||||||
|
max_temp: 120
|
||||||
|
#control: pid
|
||||||
|
#pid_kp: 58.437
|
||||||
|
#pid_ki: 2.347
|
||||||
|
#pid_kd: 363.769
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# Probe
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
## Inductive Probe
|
||||||
|
## This probe is not used for Z height, only Quad Gantry Leveling
|
||||||
|
## Z_MAX on mcu_z
|
||||||
|
#[probe]
|
||||||
|
## If your probe is NO instead of NC, change pin to ^!z:P0.10
|
||||||
|
#Klicky-Probe
|
||||||
|
#pin: ^z:P0.10
|
||||||
|
#x_offset: 0
|
||||||
|
#y_offset: 19.75
|
||||||
|
#z_offset: 0
|
||||||
|
#speed: 10.0
|
||||||
|
#samples: 3
|
||||||
|
#samples_result: median
|
||||||
|
#sample_retract_dist: 3.0
|
||||||
|
#samples_tolerance: 0.006
|
||||||
|
#samples_tolerance_retries: 3
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# Fan Control
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
## Hotend Fan - XYE board, HE1 Connector
|
||||||
|
#[heater_fan hotend_fan]
|
||||||
|
#pin: P2.4
|
||||||
|
#max_power: 1.0
|
||||||
|
#kick_start_time: 0.5
|
||||||
|
#heater: extruder
|
||||||
|
#heater_temp: 50.0
|
||||||
|
## If you are experiencing back flow, you can reduce fan_speed
|
||||||
|
#fan_speed: 1.0
|
||||||
|
|
||||||
|
## Print Cooling Fan - XYE board, Fan Pin
|
||||||
|
# Used for hour_counter_signal
|
||||||
|
#[fan]
|
||||||
|
#pin: P2.3
|
||||||
|
#kick_start_time: 0.5
|
||||||
|
## Depending on your fan, you may need to increase this value
|
||||||
|
## if your fan will not start. Can change cycle_time (increase)
|
||||||
|
## if your fan is not able to slow down effectively
|
||||||
|
#off_below: 0.10
|
||||||
|
|
||||||
|
[output_pin hour_counter_signal]
|
||||||
|
pin: P2.3
|
||||||
|
value: 0
|
||||||
|
|
||||||
|
|
||||||
|
## Controller fan - Z board, HE1 Connector
|
||||||
|
[heater_fan controller_fan]
|
||||||
|
pin: z:P2.4
|
||||||
|
kick_start_time: 0.5
|
||||||
|
heater: heater_bed
|
||||||
|
heater_temp: 45.0
|
||||||
|
|
||||||
|
## Exhaust fan - Z board, HE0 Connector
|
||||||
|
[heater_fan exhaust_fan]
|
||||||
|
pin: z:P2.7
|
||||||
|
max_power: 1.0
|
||||||
|
shutdown_speed: 0.0
|
||||||
|
kick_start_time: 5.0
|
||||||
|
heater: heater_bed
|
||||||
|
heater_temp: 60
|
||||||
|
fan_speed: 1.0
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# LED Control
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
# Chamber Lighting - Bed Connector (Optional)
|
||||||
|
#[output_pin caselight]
|
||||||
|
#pin: P2.5
|
||||||
|
#pwm:true
|
||||||
|
#shutdown_value: 0
|
||||||
|
#value:1
|
||||||
|
#cycle_time: 0.01
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# Homing and Gantry Adjustment Routines
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
#[safe_z_home]
|
||||||
|
## XY Location of the Z Endstop Switch
|
||||||
|
## Update -10,-10 to the XY coordinates of your endstop pin
|
||||||
|
## (such as 157,305) after going through Z Endstop Pin
|
||||||
|
## Location Definition step.
|
||||||
|
#home_xy_position:175,175
|
||||||
|
#speed:30
|
||||||
|
#z_hop:3 #[OLD] 10
|
||||||
|
|
||||||
|
|
||||||
|
## Use QUAD_GANTRY_LEVEL to level a gantry.
|
||||||
|
## Min & Max gantry corners - measure from nozzle at MIN (0,0) and
|
||||||
|
## MAX (250, 250), (300,300), or (350,350) depending on your printer size
|
||||||
|
## to respective belt positions
|
||||||
|
[quad_gantry_level]
|
||||||
|
#--------------------------------------------------------------------
|
||||||
|
## Gantry Corners for 250mm Build
|
||||||
|
## Uncomment for 250mm build
|
||||||
|
#gantry_corners:
|
||||||
|
# -60,-10
|
||||||
|
# 310, 320
|
||||||
|
## Probe points
|
||||||
|
#points:
|
||||||
|
# 50,25
|
||||||
|
# 50,175
|
||||||
|
# 200,175
|
||||||
|
# 200,25
|
||||||
|
|
||||||
|
## Gantry Corners for 300mm Build
|
||||||
|
## Uncomment for 300mm build
|
||||||
|
#gantry_corners:
|
||||||
|
# -60,-10
|
||||||
|
# 360,370
|
||||||
|
## Probe points
|
||||||
|
#points:
|
||||||
|
# 50,25
|
||||||
|
# 50,225
|
||||||
|
# 250,225
|
||||||
|
# 250,25
|
||||||
|
|
||||||
|
## Gantry Corners for 350mm Build
|
||||||
|
## Uncomment for 350mm build
|
||||||
|
gantry_corners:
|
||||||
|
-60,-10
|
||||||
|
410,420
|
||||||
|
## Probe points
|
||||||
|
points:
|
||||||
|
50,25
|
||||||
|
50,275
|
||||||
|
300,275
|
||||||
|
300,25
|
||||||
|
|
||||||
|
#--------------------------------------------------------------------
|
||||||
|
speed: 150 #[OLD] 150
|
||||||
|
horizontal_move_z: 15
|
||||||
|
retries: 5
|
||||||
|
retry_tolerance: 0.0075
|
||||||
|
max_adjust: 10
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# Displays
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
## Uncomment the display that you have. Display connects to Z MCU
|
||||||
|
#--------------------------------------------------------------------
|
||||||
|
|
||||||
|
## RepRapDiscount 128x64 Full Graphic Smart Controller
|
||||||
|
#[display]
|
||||||
|
#lcd_type: st7920
|
||||||
|
#cs_pin: z:P1.19
|
||||||
|
#sclk_pin: z:P1.20
|
||||||
|
#sid_pin: z:P1.18
|
||||||
|
#menu_timeout: 40
|
||||||
|
#encoder_pins: ^z:P3.26, ^z:P3.25
|
||||||
|
#click_pin: ^!z:P0.28
|
||||||
|
|
||||||
|
#[output_pin beeper]
|
||||||
|
#pin: z:P1.30
|
||||||
|
|
||||||
|
#--------------------------------------------------------------------
|
||||||
|
|
||||||
|
## mini12864 LCD Display
|
||||||
|
#[display]
|
||||||
|
#lcd_type: uc1701
|
||||||
|
#cs_pin: z:P1.18
|
||||||
|
#a0_pin: z:P1.19
|
||||||
|
#encoder_pins: ^z:P3.25,^z:P3.26
|
||||||
|
#click_pin: ^!z:P0.28
|
||||||
|
#contrast: 63
|
||||||
|
|
||||||
|
## To control Neopixel RGB in mini12864 display
|
||||||
|
#[neopixel fysetc_mini12864]
|
||||||
|
#pin: z:P1.21
|
||||||
|
#chain_count: 3
|
||||||
|
#initial_RED: 0.1
|
||||||
|
#initial_GREEN: 0.5
|
||||||
|
#initial_BLUE: 0.0
|
||||||
|
#color_order: RGB
|
||||||
|
|
||||||
|
## Set RGB values on boot up for each Neopixel.
|
||||||
|
## Index 1 = display, Index 2 and 3 = Knob
|
||||||
|
#[delayed_gcode setdisplayneopixel]
|
||||||
|
#initial_duration: 1
|
||||||
|
#gcode:
|
||||||
|
# SET_LED LED=fysetc_mini12864 RED=1 GREEN=1 BLUE=1 INDEX=1 TRANSMIT=0
|
||||||
|
# SET_LED LED=fysetc_mini12864 RED=1 GREEN=0 BLUE=0 INDEX=2 TRANSMIT=0
|
||||||
|
# SET_LED LED=fysetc_mini12864 RED=1 GREEN=0 BLUE=0 INDEX=3
|
||||||
|
|
||||||
|
#--------------------------------------------------------------------
|
||||||
|
|
||||||
|
#[neopixel stealthburner]
|
||||||
|
# To control Neopixel RGB in stealthburner
|
||||||
|
#pin: z:P1.24
|
||||||
|
#chain_count: 3
|
||||||
|
#initial_RED: 1
|
||||||
|
#initial_GREEN: 0
|
||||||
|
#initial_BLUE: 0
|
||||||
|
#initial_WHITE: 0.0
|
||||||
|
#color_order: GRBW
|
||||||
|
|
||||||
|
# Set RGB values on boot up for each Neopixel.
|
||||||
|
# Index 1 = logo, Index 2 and 3 = print bed light
|
||||||
|
#[delayed_gcode setstealthburnerneopixel]
|
||||||
|
#initial_duration: 1
|
||||||
|
#gcode:
|
||||||
|
# SET_LED LED=stealthburner RED=0.25490 GREEN=0.71372 BLUE=0.901962 INDEX=1 TRANSMIT=0
|
||||||
|
# SET_LED LED=stealthburner RED=0 GREEN=0 BLUE=0 WHITE=1 INDEX=2 TRANSMIT=0
|
||||||
|
# SET_LED LED=stealthburner RED=0 GREEN=0 BLUE=0 WHITE=1 INDEX=3 TRANSMIT=1
|
||||||
|
|
||||||
|
#--------------------------------------------------------------------
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# Macros
|
||||||
|
#####################################################################
|
||||||
|
[gcode_macro PARK]
|
||||||
|
gcode:
|
||||||
|
#{% set th = printer.toolhead %}
|
||||||
|
#G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y//2} Z30
|
||||||
|
|
||||||
|
# Park on wipe pad.
|
||||||
|
G0 X12
|
||||||
|
G0 Y349
|
||||||
|
G0 X17
|
||||||
|
|
||||||
|
[gcode_macro G32]
|
||||||
|
gcode:
|
||||||
|
{% set th = printer.toolhead %}
|
||||||
|
SAVE_GCODE_STATE NAME=STATE_G32
|
||||||
|
G90
|
||||||
|
G28
|
||||||
|
QUAD_GANTRY_LEVEL
|
||||||
|
G28
|
||||||
|
#PARK on the middle of the bed
|
||||||
|
G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y//2} Z30
|
||||||
|
RESTORE_GCODE_STATE NAME=STATE_G32
|
||||||
|
|
||||||
|
[gcode_macro PRINT_START]
|
||||||
|
# Use PRINT_START for the slicer starting script - please customise for your slicer of choice
|
||||||
|
gcode:
|
||||||
|
#G32 ; home all axes
|
||||||
|
#G90 ; absolute positioning
|
||||||
|
#G1 Z20 F3000 ; move nozzle away from bed
|
||||||
|
|
||||||
|
{% set EXTRUDER = params.EXTRUDER|int %}
|
||||||
|
{% set BED = params.BED|int %}
|
||||||
|
|
||||||
|
SET_LED LED="OrbiLED" RED=1 GREEN=1 BLUE=0 WHITE=0 SYNC=0 INDEX=1 TRANSMIT=1; Yellow
|
||||||
|
|
||||||
|
M117 Starting hour counter
|
||||||
|
SET_PIN PIN=hour_counter_signal VALUE=1
|
||||||
|
|
||||||
|
M117 Clearing BED Mesh
|
||||||
|
BED_MESH_CLEAR
|
||||||
|
SET_GCODE_OFFSET Z=0
|
||||||
|
|
||||||
|
M117 Make sure nozzle is a probing temp
|
||||||
|
M109 S150
|
||||||
|
|
||||||
|
M117 Homing axes (cold)
|
||||||
|
G28
|
||||||
|
M117 Position beacon at 2mm for heat soak
|
||||||
|
G0 Z2
|
||||||
|
|
||||||
|
M117 Start heating bed
|
||||||
|
M140 S{BED}
|
||||||
|
|
||||||
|
M117 Preheat nozzle to probing temp
|
||||||
|
M109 S150
|
||||||
|
|
||||||
|
M117 Wait on bed temperature
|
||||||
|
M190 S{BED}
|
||||||
|
|
||||||
|
M117 Wait 1 minute to let temp settle
|
||||||
|
G4 P60000 ; optional, let temps settle for 1 min
|
||||||
|
|
||||||
|
M117 Clean Nozzle
|
||||||
|
CLEAN_NOZZLE
|
||||||
|
|
||||||
|
M117 Calibrate Beacon Z offset (Contact-HOT)
|
||||||
|
G28 Z METHOD=CONTACT CALIBRATE=1
|
||||||
|
M117 Quad Grantry Leveling
|
||||||
|
QUAD_GANTRY_LEVEL
|
||||||
|
M117 Bed Mesh in Scan Mode
|
||||||
|
BED_MESH_CALIBRATE RUNS=2
|
||||||
|
|
||||||
|
M117 Clean Nozzle
|
||||||
|
CLEAN_NOZZLE
|
||||||
|
|
||||||
|
M117 Calibrate Beacon Z offset after Mesh
|
||||||
|
G28 Z METHOD=CONTACT CALIBRATE=0 ; calibrate z offset only after tilt/mesh
|
||||||
|
|
||||||
|
M117 Wait on nozzle printing temperature
|
||||||
|
M109 S{EXTRUDER} ; wait for extruder temp
|
||||||
|
|
||||||
|
M117 Add a little offset for hotend thermal expansion
|
||||||
|
SET_GCODE_OFFSET Z=0.06 ; add a little offset for hotend thermal expansion
|
||||||
|
; needs fine tuning, long meltzones require more
|
||||||
|
#SET_GCODE_OFFSET Z_ADJUST={OFFSET} ; apply optional material squish via slicer
|
||||||
|
|
||||||
|
M117 Prime Nozzle
|
||||||
|
PRIME_NOZZLE ; call another macro to purge or prime nozzle
|
||||||
|
|
||||||
|
SET_LED LED="OrbiLED" RED=0 GREEN=1 BLUE=0 WHITE=0 SYNC=0 INDEX=1 TRANSMIT=1; Yellow
|
||||||
|
M117 Printing...
|
||||||
|
; start printing
|
||||||
|
|
||||||
|
|
||||||
|
[gcode_macro PRINT_END]
|
||||||
|
# Use PRINT_END for the slicer ending script - please customise for your slicer of choice
|
||||||
|
gcode:
|
||||||
|
# safe anti-stringing move coords
|
||||||
|
{% set th = printer.toolhead %}
|
||||||
|
{% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
|
||||||
|
{% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
|
||||||
|
{% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
|
||||||
|
|
||||||
|
SAVE_GCODE_STATE NAME=STATE_PRINT_END
|
||||||
|
|
||||||
|
M117 Print has ended
|
||||||
|
M400 ; wait for buffer to clear
|
||||||
|
G92 E0 ; zero the extruder
|
||||||
|
G1 E-5.0 F1800 ; retract filament
|
||||||
|
|
||||||
|
M117 Turn Off Heaters
|
||||||
|
TURN_OFF_HEATERS
|
||||||
|
|
||||||
|
G90 ; absolute positioning
|
||||||
|
G0 X{x_safe} Y{y_safe} Z{z_safe} F20000 ; move nozzle to remove stringing
|
||||||
|
#G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600 ; park nozzle at rear
|
||||||
|
PARK ; PARK on the wipe pad
|
||||||
|
M107 ; turn off fan
|
||||||
|
|
||||||
|
M117 Bed Mesh Clear
|
||||||
|
BED_MESH_CLEAR
|
||||||
|
|
||||||
|
# The purpose of the SAVE_GCODE_STATE/RESTORE_GCODE_STATE
|
||||||
|
# command pair is to restore the printer's coordinate system
|
||||||
|
# and speed settings since the commands above change them.
|
||||||
|
# However, to prevent any accidental, unintentional toolhead
|
||||||
|
# moves when restoring the state, explicitly set MOVE=0.
|
||||||
|
RESTORE_GCODE_STATE NAME=STATE_PRINT_END MOVE=0
|
||||||
|
|
||||||
|
M117 Turn hours counter off
|
||||||
|
SET_PIN PIN=hour_counter_signal VALUE=0
|
||||||
|
|
||||||
|
SET_LED LED="OrbiLED" RED=0.25490 GREEN=0.71372 BLUE=0.901962 WHITE=0 SYNC=0 INDEX=1 TRANSMIT=1 ; Turquoise
|
||||||
|
M117 Print done. Idle...
|
||||||
|
|
||||||
|
[gcode_macro CLEAN_NOZZLE]
|
||||||
|
variable_x_wipe_min: 25
|
||||||
|
variable_x_wipe_max: 57
|
||||||
|
variable_y_wipe: 349
|
||||||
|
gcode:
|
||||||
|
{% set x_min = params.X|default(printer["gcode_macro CLEAN_NOZZLE"].x_wipe_min)|float %}
|
||||||
|
{% set x_max = params.X2|default(printer["gcode_macro CLEAN_NOZZLE"].x_wipe_max)|float %}
|
||||||
|
{% set y_wipe = params.Y|default(printer["gcode_macro CLEAN_NOZZLE"].y_wipe)|float %}
|
||||||
|
|
||||||
|
SAVE_GCODE_STATE NAME=clean_nozzle_gantry
|
||||||
|
G90
|
||||||
|
G1 X{x_max} F12000
|
||||||
|
G1 Y{y_wipe} F12000
|
||||||
|
G1 X{x_min} F12000
|
||||||
|
G1 X{x_max} F12000
|
||||||
|
G1 X{x_min} F12000
|
||||||
|
G1 X{x_max} F12000
|
||||||
|
RESTORE_GCODE_STATE NAME=clean_nozzle_gantry
|
||||||
|
|
||||||
|
|
||||||
|
[gcode_macro PRIME_NOZZLE]
|
||||||
|
variable_x_blob: 10
|
||||||
|
variable_y_blob: 10
|
||||||
|
variable_z_height: 0.3
|
||||||
|
variable_blob_extrude: 15
|
||||||
|
variable_line_length: 50
|
||||||
|
variable_line_extrusion: 10
|
||||||
|
gcode:
|
||||||
|
{% set x_blob = printer["gcode_macro PRIME_NOZZLE"].x_blob %}
|
||||||
|
{% set y_blob = printer["gcode_macro PRIME_NOZZLE"].y_blob %}
|
||||||
|
{% set z_height = printer["gcode_macro PRIME_NOZZLE"].z_height %}
|
||||||
|
{% set blob_extrude = printer["gcode_macro PRIME_NOZZLE"].blob_extrude %}
|
||||||
|
{% set line_length = printer["gcode_macro PRIME_NOZZLE"].line_length %}
|
||||||
|
{% set line_extrusion = printer["gcode_macro PRIME_NOZZLE"].line_extrusion %}
|
||||||
|
|
||||||
|
SAVE_GCODE_STATE NAME=prime_state
|
||||||
|
|
||||||
|
G90
|
||||||
|
|
||||||
|
; Purge blob
|
||||||
|
G1 X{x_blob} Y{y_blob} F12000
|
||||||
|
G1 Z{z_height} F3000
|
||||||
|
G92 E0
|
||||||
|
G1 E{blob_extrude} F300
|
||||||
|
|
||||||
|
; Long purge line
|
||||||
|
G92 E0
|
||||||
|
G1 X{ x_blob + line_length } E{line_extrusion} F600
|
||||||
|
|
||||||
|
G92 E0
|
||||||
|
|
||||||
|
RESTORE_GCODE_STATE NAME=prime_state
|
||||||
|
|
||||||
|
[gcode_macro PRINTER_OFF]
|
||||||
|
gcode:
|
||||||
|
{action_call_remote_method("set_device_power",
|
||||||
|
device="printer_psu",
|
||||||
|
state="off")}
|
||||||
|
[idle_timeout]
|
||||||
|
timeout: 1800
|
||||||
|
gcode:
|
||||||
|
M84; TURN_OFF_MOTORS
|
||||||
|
TURN_OFF_HEATERS
|
||||||
|
UPDATE_DELAYED_GCODE ID=delayed_printer_off DURATION=60
|
||||||
|
|
||||||
|
[delayed_gcode delayed_printer_off]
|
||||||
|
initial_duration: 0.
|
||||||
|
gcode:
|
||||||
|
{% if printer.idle_timeout.state == "Idle" %}
|
||||||
|
PRINTER_OFF
|
||||||
|
{% endif %}
|
||||||
|
|
||||||
|
[exclude_object]
|
||||||
|
|
||||||
|
[include mainsail.cfg]
|
||||||
|
[include Orbitool_O2S.cfg]
|
||||||
|
[include Orbiter2_SmartSensor.cfg]
|
||||||
|
[include beacon3d.cfg]
|
||||||
|
|
||||||
|
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||||
|
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||||
|
#*#
|
||||||
|
#*# [beacon model default]
|
||||||
|
#*# model_coef = 1.4952403602340907,
|
||||||
|
#*# 1.8656605487245284,
|
||||||
|
#*# 0.7758837444105147,
|
||||||
|
#*# 0.2338499148883277,
|
||||||
|
#*# 0.2538302898654481,
|
||||||
|
#*# 0.359354056245091,
|
||||||
|
#*# -0.16099562977240284,
|
||||||
|
#*# -0.19513617935485192,
|
||||||
|
#*# 0.23115190966388482,
|
||||||
|
#*# 0.1423188524375016
|
||||||
|
#*# model_domain = 1.825441207876964e-07,1.928381480708496e-07
|
||||||
|
#*# model_range = 0.200000,5.000000
|
||||||
|
#*# model_temp = 32.414554
|
||||||
|
#*# model_offset = 0.00000
|
||||||
|
#*#
|
||||||
|
#*# [bed_mesh default]
|
||||||
|
#*# version = 1
|
||||||
|
#*# points =
|
||||||
|
#*# 0.040603, 0.060812, 0.077484, 0.063208, 0.035083
|
||||||
|
#*# 0.010789, 0.002650, 0.023569, 0.030275, 0.008437
|
||||||
|
#*# -0.005587, -0.017298, 0.006790, 0.008916, -0.006198
|
||||||
|
#*# 0.003364, -0.011489, 0.011971, 0.019618, 0.009951
|
||||||
|
#*# 0.032870, 0.026835, 0.051747, 0.059173, 0.034837
|
||||||
|
#*# x_count = 5
|
||||||
|
#*# y_count = 5
|
||||||
|
#*# mesh_x_pps = 2
|
||||||
|
#*# mesh_y_pps = 2
|
||||||
|
#*# algo = bicubic
|
||||||
|
#*# tension = 0.2
|
||||||
|
#*# min_x = 40.0
|
||||||
|
#*# max_x = 310.0
|
||||||
|
#*# min_y = 40.0
|
||||||
|
#*# max_y = 310.0
|
||||||
|
#*#
|
||||||
|
#*# [heater_bed]
|
||||||
|
#*# control = pid
|
||||||
|
#*# pid_kp = 40.680
|
||||||
|
#*# pid_ki = 1.349
|
||||||
|
#*# pid_kd = 306.625
|
||||||
|
#*#
|
||||||
|
#*# [extruder]
|
||||||
|
#*# control = pid
|
||||||
|
#*# pid_kp = 30.317
|
||||||
|
#*# pid_ki = 1.357
|
||||||
|
#*# pid_kd = 169.395
|
||||||
|
#*#
|
||||||
|
#*# [input_shaper]
|
||||||
|
#*# shaper_type_x = 3hump_ei
|
||||||
|
#*# shaper_freq_x = 80.8
|
||||||
|
#*# shaper_type_y = mzv
|
||||||
|
#*# shaper_freq_y = 37.0
|
||||||
36
printer.cfg
36
printer.cfg
@@ -627,6 +627,9 @@ gcode:
|
|||||||
BED_MESH_CLEAR
|
BED_MESH_CLEAR
|
||||||
SET_GCODE_OFFSET Z=0
|
SET_GCODE_OFFSET Z=0
|
||||||
|
|
||||||
|
M117 Start heating bed
|
||||||
|
M140 S{BED}
|
||||||
|
|
||||||
M117 Make sure nozzle is a probing temp
|
M117 Make sure nozzle is a probing temp
|
||||||
M109 S150
|
M109 S150
|
||||||
|
|
||||||
@@ -634,9 +637,6 @@ gcode:
|
|||||||
G28
|
G28
|
||||||
M117 Position beacon at 2mm for heat soak
|
M117 Position beacon at 2mm for heat soak
|
||||||
G0 Z2
|
G0 Z2
|
||||||
|
|
||||||
M117 Start heating bed
|
|
||||||
M140 S{BED}
|
|
||||||
|
|
||||||
M117 Preheat nozzle to probing temp
|
M117 Preheat nozzle to probing temp
|
||||||
M109 S150
|
M109 S150
|
||||||
@@ -803,19 +803,19 @@ gcode:
|
|||||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||||
#*#
|
#*#
|
||||||
#*# [beacon model default]
|
#*# [beacon model default]
|
||||||
#*# model_coef = 1.4952403602340907,
|
#*# model_coef = 1.5221285866393515,
|
||||||
#*# 1.8656605487245284,
|
#*# 1.866198844496922,
|
||||||
#*# 0.7758837444105147,
|
#*# 0.7476815631002864,
|
||||||
#*# 0.2338499148883277,
|
#*# 0.251980360230201,
|
||||||
#*# 0.2538302898654481,
|
#*# 0.21472699285297098,
|
||||||
#*# 0.359354056245091,
|
#*# 0.35706395281664555,
|
||||||
#*# -0.16099562977240284,
|
#*# -0.03245574497555998,
|
||||||
#*# -0.19513617935485192,
|
#*# -0.2592170575906024,
|
||||||
#*# 0.23115190966388482,
|
#*# 0.14750738686832027,
|
||||||
#*# 0.1423188524375016
|
#*# 0.1850988275522277
|
||||||
#*# model_domain = 1.825441207876964e-07,1.928381480708496e-07
|
#*# model_domain = 1.8321303577304574e-07,1.929058179384094e-07
|
||||||
#*# model_range = 0.200000,5.000000
|
#*# model_range = 0.200000,5.000000
|
||||||
#*# model_temp = 32.414554
|
#*# model_temp = 29.023754
|
||||||
#*# model_offset = 0.00000
|
#*# model_offset = 0.00000
|
||||||
#*#
|
#*#
|
||||||
#*# [bed_mesh default]
|
#*# [bed_mesh default]
|
||||||
@@ -845,9 +845,9 @@ gcode:
|
|||||||
#*#
|
#*#
|
||||||
#*# [extruder]
|
#*# [extruder]
|
||||||
#*# control = pid
|
#*# control = pid
|
||||||
#*# pid_kp = 30.317
|
#*# pid_kp = 35.621
|
||||||
#*# pid_ki = 1.357
|
#*# pid_ki = 2.423
|
||||||
#*# pid_kd = 169.395
|
#*# pid_kd = 130.904
|
||||||
#*#
|
#*#
|
||||||
#*# [input_shaper]
|
#*# [input_shaper]
|
||||||
#*# shaper_type_x = 3hump_ei
|
#*# shaper_type_x = 3hump_ei
|
||||||
|
|||||||
Reference in New Issue
Block a user