Autocommit from 2025-12-02 18:00:05

Klipper version: v0.13.0-411-g938300f3

Moonraker version: v0.9.3-128-g960e933

Mainsail version: v2.15.0

printer.cfg

@@ -617,7 +617,7 @@ gcode:
 
     {% set EXTRUDER = params.EXTRUDER|int %}
     {% set BED = params.BED|int %}
-    {% set FILAMENT = params.FILAMENT|int %}
+    {% set FILAMENT = params.FILAMENT|default("UNKNOWN") %}
 
     SET_LED LED="OrbiLED" RED=1 GREEN=1 BLUE=0 WHITE=0 SYNC=0 INDEX=1 TRANSMIT=1; Yellow
 
@@ -669,8 +669,10 @@ gcode:
 
     {% if FILAMENT == 'PLA' %}
         {% set ZOFF = 0.0|float %}
+    {% elif FILAMENT == "ASA" %}
+        {% set ZOFF = 0.00|float %}
     {% else %}
-        {% set ZOFF = 0.06|float %}
+        {% set ZOFF = 0.00|float %}
     {% endif %}
     M117 Add a little offset ({ZOFF} - {FILAMENT}) for hotend thermal expansion
     SET_GCODE_OFFSET Z={ZOFF}