diff --git a/Orbiter2_SmartSensor.cfg b/Orbiter2_SmartSensor.cfg
index a6e8398..b6c1016 100644
--- a/Orbiter2_SmartSensor.cfg
+++ b/Orbiter2_SmartSensor.cfg
@@ -24,7 +24,7 @@ variable_disable_autoload       :False  # disable filament autoload feature by s
 variable_disable_autounload     :False  # disable filamen unload by unload button
 variable_disable_runout         :False  # disable runout by setting this variable True
 variable_disable_autochange     :True   # disable filament auto change after runout detection
-variable_disable_tangle         :True  # disable tangle by setting this variable True
+variable_disable_tangle         :False  # disable tangle by setting this variable True
 variable_pause_timeout          :3600   # printer timeout setting in seconds, avoids disabling of steppers and heaters after klipper default timeout of 600s 
 variable_enable_beep            :False   # uses M300 sound feature, set it True to enable
 variable_park_position_x        :20     # edit your X parking position here for pause macro triggered by runout
diff --git a/moonraker-sql.db b/moonraker-sql.db
index b37530f..287cf48 100644
Binary files a/moonraker-sql.db and b/moonraker-sql.db differ
diff --git a/printer.cfg b/printer.cfg
index 715225f..6acf609 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -617,7 +617,7 @@ gcode:
 
     {% set EXTRUDER = params.EXTRUDER|int %}
     {% set BED = params.BED|int %}
-    {% set FILAMENT = params.FILAMENT|int %}
+    {% set FILAMENT = params.FILAMENT|default("UNKNOWN") %}
 
     SET_LED LED="OrbiLED" RED=1 GREEN=1 BLUE=0 WHITE=0 SYNC=0 INDEX=1 TRANSMIT=1; Yellow
 
@@ -669,8 +669,10 @@ gcode:
 
     {% if FILAMENT == 'PLA' %}
         {% set ZOFF = 0.0|float %}
+    {% elif FILAMENT == "ASA" %}
+        {% set ZOFF = 0.00|float %}
     {% else %}
-        {% set ZOFF = 0.06|float %}
+        {% set ZOFF = 0.00|float %}
     {% endif %}
     M117 Add a little offset ({ZOFF} - {FILAMENT}) for hotend thermal expansion
     SET_GCODE_OFFSET Z={ZOFF}