From 02d1d6ebe078e11ae4be3d64c3f65cae2b5a175e Mon Sep 17 00:00:00 2001
From: Sebastien Plante <splante@quebecit.net>
Date: Mon, 6 Jul 2026 12:00:04 -0400
Subject: [PATCH] Autocommit from 2026-07-06 12:00:04

Klipper version: v0.13.0-464-g48f0b3ca

Moonraker version: v0.10.0-2-g3e29720

Mainsail version: v2.17.0
---
 Orbiter2_SmartSensor.cfg |   6 +++---
 moonraker-sql.db         | Bin 438272 -> 438272 bytes
 printer.cfg              |  27 ++++++++++++++++++---------
 3 files changed, 21 insertions(+), 12 deletions(-)

diff --git a/Orbiter2_SmartSensor.cfg b/Orbiter2_SmartSensor.cfg
index a6e8398..cfc4930 100644
--- a/Orbiter2_SmartSensor.cfg
+++ b/Orbiter2_SmartSensor.cfg
@@ -285,7 +285,7 @@ gcode:
     SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=extruder_restore_temp VALUE={printer.extruder.target}
     ##### end of definitions #####
     SAVE_GCODE_STATE NAME=PAUSE_state 
-    SET_IDLE_TIMEOUT TIMEOUT={(sensor.pause_timeout)|float} # increase printer timeout
+    #SET_IDLE_TIMEOUT TIMEOUT={(sensor.pause_timeout)|float} # increase printer timeout
     BASE_PAUSE
     G91
     G1 E-{e} F2100
@@ -314,7 +314,7 @@ gcode:
     G1 E{e} F2100
     G90    
     M118 O2S: Temperatures restored, resmume printing!
-    SET_IDLE_TIMEOUT TIMEOUT=600 # restor klipper default printer timeout to 10 min
+    #SET_IDLE_TIMEOUT TIMEOUT=600 # restor klipper default printer timeout to 10 min
     RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
     BASE_RESUME    
    # SET_LED LED=OrbiLED RED=1.0 GREEN=1.0 BLUE=1.0
@@ -325,7 +325,7 @@ gcode:
     CLEAR_PAUSE
     #SDCARD_RESET_FILE
     BASE_CANCEL_PRINT 
-    SET_IDLE_TIMEOUT TIMEOUT=600 # restor klipper default printer timeout to 10 min
+    #SET_IDLE_TIMEOUT TIMEOUT=600 # restor klipper default printer timeout to 10 min
 
 [gcode_macro T0]
 gcode:
diff --git a/moonraker-sql.db b/moonraker-sql.db
index 78a7de358dc52f4c1175e55b59f05c394bdb1527..ff7589dfe473b98ea8956596531177123d38a861 100644
GIT binary patch
delta 283
zcmZp8Al2|dYJxQ5&51J3j5iw-wk9yn_hVF_=Fcc0_%S6lEwMDGM5kMmO<I?MU3&V1
zct&w+N5i(;8<_Y4p|Wb-8f?;vK-rAU;*$KL%98w&#GLq&%-mE*V}U379<Rco3N^cR
zrdRtjYBOq2U+&MS$*48`qCcY|yIb0+Fppc_+kg5q2J<tnnC=_TD9^ZjdTu<U662cb
z6XF>a7*|i<7|*D|xN7>Xct%ymm2C-(Z3#?m3CwK?EZY)T*%VkR8MrGq3o7Jub9OQ}
z7V$A?25V2}E@!ivey)g3NOg}uSO=5itx5Oyd>68DxZhCU=b^pE;o-IH{+hIl4*$RG
bKePR&%XWp$tjsKvKWyh}o4~qk0-FK=71?FK

delta 273
zcmZp8Al2|dYJxQ5^@%dhjMp0zwk9yn_hVF?=Fcc0_#q`VEwMDGM5kMsO<I?MU3&V1
zct&w+M?;RA8&AAl1eI0mR$`M@1j=S)7MJ7~RhHzJB<94IWag$i8Z{YQI?JvARjApm
zHoe-PQJYb9`f`6pO-7aJ7yTI(*<I6B!XHaFZvW}e7|hSOXu5Aaqdeon>ACTYN{q{<
zPl#t!U|c$VV?3h<<C5vO;u%#L7q=xawk0sNB`~)ouxv|UWm908%D_E!v!FsZH(y73
zV-X*NX0S3l0|z_Dbb)d<Q|ZjS_=2MR^rF<_V#iyP_6US^Fxj8q>1kQxz_49mGb=O8
Q<PY1q+9t3ro4}?305J<&$p8QV

diff --git a/printer.cfg b/printer.cfg
index a0fe08b..cc1bd83 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -792,17 +792,26 @@ gcode:
 [idle_timeout]
 timeout: 1800
 gcode:
-  M84; TURN_OFF_MOTORS
-  TURN_OFF_HEATERS
-  UPDATE_DELAYED_GCODE ID=delayed_printer_off DURATION=60
-  
-[delayed_gcode delayed_printer_off]
-initial_duration: 0.
-gcode:
-  {% if printer.idle_timeout.state == "Idle" %}
-    PRINTER_OFF
+  # In pause state, Only the nozzle is turned OFF
+  {% if printer.print_stats.state == "paused" %}
+    SET_HEATER_TEMPERATURE HEATER=extruder TARGET=0
+  {% else %}
+    # Standby/Idle or complete, can be turned off.
+    M84 ; Motors Off
+    TURN_OFF_HEATERS
+    UPDATE_DELAYED_GCODE ID=delayed_printer_off DURATION=60
   {% endif %}
 
+[delayed_gcode delayed_printer_off]
+initial_duration: 0
+gcode:
+  # Can only be turned off if not paused.
+  {% if printer.idle_timeout.state == "Idle" and printer.print_stats.state != "paused" %}
+    printer_off
+  {% endif %}
+
+
+
 [exclude_object]
 
 [include mainsail.cfg]